Lifestyle

With a hard-wearing, classic low-sheen finish, Lifestyle is available in our signature colour palette and formulated without oils, making it safer for you and your home.

Available to buy now

A colour card was successfully added to your basket

View Basket

All you need to know

Product Information

Features

Ingredients

Data Sheet

Being both durable and washable, Earthborn Lifestyle Emulsion is perfect for those busier areas in the home that are more likely to become marked, especially with little finger prints or mucky paws!

With a hardwearing, classic low-sheen finish, Lifestyle Emulsion is available in our signature colour palette and formulated without oils, making it safer for you and your home. And because it’s virtually VOC free and easy to apply with no nasty paint-smells, your room can return to normal in no time.

Application method: Brush, roller or spray
Touch dry in 1-2 hours. Allow 6-12 hours between coats
Sizes: 2.5L & 5L
Approx Coverage: Up to 10-12m² per litre
Note: Usual drying time under ‘normal’ conditions. Coverage will depend on substrate and application method.

Colours on screen may vary from actual paint. Slight variations in colour can occur between batches and finishes; the substrate and texture of the surface can also change the appearance of the final colour, as can lighting.

Advice is given in good faith but without warranty as methods of application and site conditions are outside of our control.

Find Nearest Stockist

Buy now

Virtually VOC Free
Oil free
Odour free
Easy to apply
Great covering power
Hardwearing
Classic low-sheen finish
Wipeable
Child and baby safe
Vegan Friendly

VOC Free

This product is virtually free of Volatile Organic Compounds.

Water,
Binder (Soft Acrylic Emulsion),
Pigments (Inc. Titanium Dioxide),
Fillers (Chalk, Talcum),
0.1% Synthetic Preservative (Isothiazolinone Mixture),
Thickener (Methylcellulose),
Dispersant (Phosphate),
PH Modifier (Sodium Hydroxide)

Download a handy data sheet. You can view it using the latest version of Adobe Acrobat Reader.

Product Data Sheet MSDS

For our Silicate Masonry Paint to work effectively, you’ll need to use either our Silicate Primer or Bonding Primer before application.

Silicate Primer: For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete. When used with Silicate Masonry Paint it will create a highly breathable and permanent chemical bond.

Bonding Primer: For use over previously painted, sound masonry substrates. When used with Silicate Masonry Paint it will create a strong mechanical bond.

Our paint and primer products when used together form a bond to the underlying substrate to create a weather resistant, beautiful matt finish.

Our primers are water based and virtually VOC free.

HOW TO USE OUR MASONRY PRIMERS

Once you know the correct primer for your project application is in 3 simple steps

Note: Do not use if the temperature is below 8°c or expected to fall below 8°c within 24 hours of application. Ensure the correct primer is used on the intended surface. Some clay surfaces may require special treatement. Please be aware Silicate Masonry Paint must be used alongside Earthborn’s Silicate Primer or Bonding Primer.