Cotswold
A product has been added to your basket.
Neither too yellow nor too brown, Cotswold is a deep, well balanced cream.
View product detailsSelect finish:
-
A durable and highly breathable alternative to conventional masonry paints and limewash that dries to a classic, matt finish.
Place your order:
5l Tin
£145.00
2.5l Tin
£83.00
Must be used with Silicate Primer or Bonding Primer.
Order Silicate Primer Order Bonding Primer100ml Sample Pot
£7.50
Product, spec and shipping information
Silicate Masonry Paint is a durable masonry paint that dries to a classic, matt finish. Being highly breathable and weather resistant it offers an alternative to traditional lime based and conventional coatings.
It can be used on interior or exterior bare, porous mineral surfaces. Eg. Stone, masonry, concrete, pebbledash, plaster and sound silicate-based painted surfaces. It’s especially suitable for renovation projects and can have a lifespan of up to 15 years.
Approx coverage: 5-7m² per litre depending on surface.
Note: Earthborn Silicate Masonry Paint can be applied over conventional ‘plastic’ masonry paints with the use of Earthborn Bonding Primer. Some clay surfaces may require special treatment.
For Silicate Masonry Paint to work effectively it must be used with either Earthborn’s Silicate Primer or Bonding Primer. Please click the Primer tab to check which primer is right for you.
Colours on screen may vary from actual paint. Slight variations in colour can occur between batches and finishes; the substrate and texture of the surface can also change the appearance of the final colour, as can lighting.
Advice is given in good faith but without warranty as methods of application and site conditions are outside of our control.
- Breathable
- Durable
- High performance alternative to limewash
- Virtually VOC free
- Low acrylic content
- Helps prevent algae growth
- Water based
- Easy to apply with standard brush and roller, a spray gun can be used with paint only.
Silicate Masonry Paint
- Water
- Potassium Silicate
- Ammonium Salt
- Calcium Carbonate
- Acrylic Stabiliser
- Cellulose
- TiO2
Silicate Primer
- Water
- Potassium Silicate
- Acrylic Stabiliser
Silicate Bonding
- Binder (VAE)
- Calcium Carbonate
- Water
- Fillers
- Titanium Dioxide
- Defoamer
- Sodium Hydrate
- Methyl Cellulose
- Preservative (Isothiazolinone Mixture)
Our online store is available to the UK only. Our checkout will re-direct you to PayPal.com in order for us to take a safe payment. You do not need a PayPal account to complete payment. Just scroll down to the button ‘Pay by Debit or Credit Card’ and checkout as a guest.
For our Silicate Masonry Paint to work effectively, you’ll need to use either our Silicate Primer or Bonding Primer before application.
Silicate Primer: For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete. When used with Silicate Masonry Paint it will create a highly breathable and permanent chemical bond.
Bonding Primer: For use over previously painted, sound masonry substrates. When used with Silicate Masonry Paint it will create a strong mechanical bond.
Our paint and primer products when used together form a bond to the underlying substrate to create a weather resistant, beautiful matt finish.
Our primers are water based and virtually VOC free.
HOW TO USE OUR MASONRY PRIMERS
Once you know the correct primer for your project application is in 3 simple steps
Note: Do not use if the temperature is below 8°c or expected to fall below 8°c within 24 hours of application. Ensure the correct primer is used on the intended surface. Some clay surfaces may require special treatement. Please be aware Silicate Masonry Paint must be used alongside Earthborn’s Silicate Primer or Bonding Primer.