Claypaint

This exciting clay-based breathable paint has a distinctive, ultra matt finish that softens and enhances the light in your room, while its contemporary colours tempt the senses.

Available to buy now

All you need to know

Product Information

Features

Ingredients

Data Sheet

Our breathable Claypaint is a luxurious, ultra-matt finish for interior walls and ceilings. Made using our unique eco friendly clay recipe it results in a highly breathable flat matt paint. Due to Claypaint being highly breathable it means that it is especially suitable for use over lime.

Available in a beautiful palette of 72 shades this deliciously thick and creamy paint goes on like a dream and often requires fewer coats than conventional emulsions. All this and no horrible smells or emissions.

Drying time 6 – 12 hours
Approx coverage Approximately 10 m² per litre.

Actual coverage will depend upon absorbency of the surface and method of application. Remember, Claypaint may require one less coat than you expect.

For more information tab across through features and ingredients, you can also download our data sheet.

Colours on screen may vary from actual paint. Slight variations in colour can occur between batches and finishes; the substrate and texture of the surface can also change the appearance of the final colour, as can lighting.

Advice is given in good faith but without warranty as methods of application and site conditions are outside of our control.

Order Colour Card Find Nearest Stockist

5L

Approx.
Coverage
50m²

2.5L

Approx.
Coverage
25m²

Tester

100ml

Buy now

Virtually VOC free
Acrylic free
Oil free
Odour free
Highly breathable
Minimises condensation
Deters mildew
Static resistant
Can benefit allergy and asthma sufferers
Easy to apply
Great covering power
Child and baby safe
Class 0 fire rating
Vegan friendly

VOC Free

This product is virtually free of Volatile Organic Compounds.

Water
Filler (Various Clays, Chalk, Kaolin)
Binder (VAE Emulsion)
Thickener (Methylcellulose)
Some colours contain pigments*
0.1% Synthetic Preservative (Isothiazolinone Mixture)

*Titanium dioxide in some colours (Our colour card details which do not contain Titanium Dioxide). Our natural clay colours; Marbles, Humpty Dumpty, Freckle & Flower Pot, do not contain Titanium Dioxide or colourant.

Download a handy data sheet. You can view it using the latest version of Adobe Acrobat Reader.

Product Data Sheet MSDS

For our Silicate Masonry Paint to work effectively, you’ll need to use either our Silicate Primer or Bonding Primer before application.

Silicate Primer: For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete. When used with Silicate Masonry Paint it will create a highly breathable and permanent chemical bond.

Bonding Primer: For use over previously painted, sound masonry substrates. When used with Silicate Masonry Paint it will create a strong mechanical bond.

Our paint and primer products when used together form a bond to the underlying substrate to create a weather resistant, beautiful matt finish.

Our primers are water based and virtually VOC free.

HOW TO USE OUR MASONRY PRIMERS

Once you know the correct primer for your project application is in 3 simple steps

Note: Do not use if the temperature is below 8°c or expected to fall below 8°c within 24 hours of application. Ensure the correct primer is used on the intended surface. Some clay surfaces may require special treatement. Please be aware Silicate Masonry Paint must be used alongside Earthborn’s Silicate Primer or Bonding Primer.