Wall Glaze
Provides a washable, breathable protective glaze when applied on top of Earthborn Claypaint. It can also be used before painting to stabilise powdery interior surfaces.
Available to buy nowAll you need to know
Earthborn Wall Glaze is a water based, clear glaze for interior use. Being virtully VOC and acrylic free, it is specially formulated for its environmental benefits. This resourceful product can be used for a whole host of projects. Use before painting to stabilise sandy, powdery interior surface.
Apply on top of Earthborn Claypaint to produce a washable, protective glaze*. Or combine it with Earthborn Pigment to create special paint effects such as sponging and colour washes, as well as an interior wood stain. You decide.
Top tip:
When using as a glaze, it is best applied with a spray bottle, working from the bottom upwards. This will help prevent drips.
For decorative effects, use a sponge.
Approx coverage 50 square metres per litre.
Approximate coverage when diluted and used as a glaze.
*If used over a painted finish as a glaze, the low sheen level of Wall Glaze may change the appearance of the paint. We recommend testing first to ensure that you are happy overall look.
Colours on screen may vary from actual paint. Slight variations in colour can occur between batches and finishes; the substrate and texture of the surface can also change the appearance of the final colour, as can lighting.
Advice is given in good faith but without warranty as methods of application and site conditions are outside of our control.
2.5L
Approx.
Coverage
125m²
750ml
Approx.
Coverage
37.5m²
- Washable
- Breathable (when diluted, see data sheet)
- Protective glaze
- Virtually VOC free
- Can be used for decorative effects
- Toy Safety Standard
VOC Free
This product is virtually free of Volatile Organic Compounds.
- Water
- Cellulose
- Vinegar Ester
- Clay
- 0.1% Preservative
For our Silicate Masonry Paint to work effectively, you’ll need to use either our Silicate Primer or Bonding Primer before application.
Silicate Primer: For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete. When used with Silicate Masonry Paint it will create a highly breathable and permanent chemical bond.
Bonding Primer: For use over previously painted, sound masonry substrates. When used with Silicate Masonry Paint it will create a strong mechanical bond.
Our paint and primer products when used together form a bond to the underlying substrate to create a weather resistant, beautiful matt finish.
Our primers are water based and virtually VOC free.
HOW TO USE OUR MASONRY PRIMERS
Once you know the correct primer for your project application is in 3 simple steps
Note: Do not use if the temperature is below 8°c or expected to fall below 8°c within 24 hours of application. Ensure the correct primer is used on the intended surface. Some clay surfaces may require special treatement. Please be aware Silicate Masonry Paint must be used alongside Earthborn’s Silicate Primer or Bonding Primer.