Casein Filler
Breathable filler, providing effective, long lasting repairs on interior or exterior walls prior to painting.
Available to buy now
All you need to know
Should you need to do some repair work before getting down to painting, Earthborn Casein Filler is the perfect complement to Earthborn environmentally friendly wall and ceiling paints.
Our Casein Filler is based on the natural milk protein casein and white lime which uses less energy to make because being titanium dioxide free. This means it has a smaller carbon footprint than most other fillers.
Suitable for interior or exterior use. Supplied in powder form for mixing as required, you can even create coloured filler by mixing it with your choice of Earthborn Pigment.
Note: As the Casein Filler contains lime, it needs to be allowed to cure before painting. This is normally 4 weeks.
Drying Time 4 – 8 hours. Sand after 8 hours.
Sizes 2kg, 500g
Approx coverage 1.5 kg per m² per mm of thickness of coating.
Colours on screen may vary from actual paint. Slight variations in colour can occur between batches and finishes; the substrate and texture of the surface can also change the appearance of the final colour, as can lighting.
Advice is given in good faith but without warranty as methods of application and site conditions are outside of our control.
500g
Coverage
1.5kg/m per mm
thickness of coating
2kg
Coverage
1.5kg/m per mm
thickness of coating
- Easy to apply
- Easy to sand
- Flexible
- Long lasting
- Breathable
- Healthier to use
- Titanium dioxide free
- Ideal with all Earthborn wall and ceiling paints
VOC Free
This product is virtually free of Volatile Organic Compounds.
- Powdered Marble
- White Lime Hydrate
- White Cement
- Cellulose
- Clay
- Casein
For our Silicate Masonry Paint to work effectively, you’ll need to use either our Silicate Primer or Bonding Primer before application.
Silicate Primer: For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete. When used with Silicate Masonry Paint it will create a highly breathable and permanent chemical bond.
Bonding Primer: For use over previously painted, sound masonry substrates. When used with Silicate Masonry Paint it will create a strong mechanical bond.
Our paint and primer products when used together form a bond to the underlying substrate to create a weather resistant, beautiful matt finish.
Our primers are water based and virtually VOC free.
HOW TO USE OUR MASONRY PRIMERS
Once you know the correct primer for your project application is in 3 simple steps
Note: Do not use if the temperature is below 8°c or expected to fall below 8°c within 24 hours of application. Ensure the correct primer is used on the intended surface. Some clay surfaces may require special treatement. Please be aware Silicate Masonry Paint must be used alongside Earthborn’s Silicate Primer or Bonding Primer.
